PDFOUTLINES_Count
IPDFDocument3 :: Outlines

See Also Example
Collapse All

This property gets the number of nodes in the outline tree.

Syntax

LONG PDFOUTLINES_Count { get; }
Value
Number of nodes in the outline tree

Remarks

The property indicates the number of nodes maintained by the PDFOUTLINES_* commands.

Equivalent in new interface: IPDFDocument4::GetOutlineCount.

Example

Getting the Number of Nodes

Delphi
[copy to clipboard] 
{ PDF object is supposed to be created }
PDF.BeginDoc;
lAction := PDF.CreateGoToPageAction(0, 0);
o1 := PDF.PDFOUTLINES_Add(0, 'Outline1', lAction, charsetANSI_CHARSET);
o2 := PDF.PDFOUTLINES_AddChild(o1, 'Outline2', lAction, charsetANSI_CHARSET);
o3 := PDF.PDFOUTLINES_Add(0, 'Outline3', lAction, charsetANSI_CHARSET);
o4 := PDF.PDFOUTLINES_AddChild(o3, 'Outline4', lAction, charsetANSI_CHARSET);
o5 := PDF.PDFOUTLINES_AddChild(o3, 'Outline5', lAction, charsetANSI_CHARSET);
cnt := PDF.PDFOUTLINES_Count; { cnt = 5 }
PDF.EndDoc;
C/C++
[copy to clipboard] 
// PDF object is supposed to be created
PDF->BeginDoc();
LONG lAction = PDF->CreateGoToPageAction(0, 0);
LONG o1 = PDF->PDFOUTLINES_Add(0, "Outline1", lAction, charsetANSI_CHARSET);
LONG o2 = PDF->PDFOUTLINES_AddChild(o1, "Outline2", lAction, charsetANSI_CHARSET);
LONG o3 = PDF->PDFOUTLINES_Add(0, "Outline3", lAction, charsetANSI_CHARSET);
LONG o4 = PDF->PDFOUTLINES_AddChild(o3, "Outline4", lAction, charsetANSI_CHARSET);
LONG o5 = PDF->PDFOUTLINES_AddChild(o3, "Outline5", lAction, charsetANSI_CHARSET);
LONG cnt = PDF->PDFOUTLINES_Count; // cnt = 5
PDF.EndDoc();
C#
[copy to clipboard] 
// PDF object is supposed to be created
PDF.BeginDoc();
long lAction = PDF.CreateGoToPageAction(0, 0);
long o1 = PDF.PDFOUTLINES_Add(0, "Outline1", lAction, TxFontCharset.charsetANSI_CHARSET);
long o2 = PDF.PDFOUTLINES_AddChild(o1, "Outline2", lAction, TxFontCharset.charsetANSI_CHARSET);
long o3 = PDF.PDFOUTLINES_Add(0, "Outline3", lAction, TxFontCharset.charsetANSI_CHARSET);
long o4 = PDF.PDFOUTLINES_AddChild(o3, "Outline4", lAction, TxFontCharset.charsetANSI_CHARSET);
long o5 = PDF.PDFOUTLINES_AddChild(o3, "Outline5", lAction, TxFontCharset.charsetANSI_CHARSET);
long cnt = PDF.PDFOUTLINES_Count; // cnt = 5
PDF.EndDoc();
Visual Basic
[copy to clipboard] 
' PDF object is supposed to be created
PDF.BeginDoc
lAction = PDF.CreateGoToPageAction(0, 0)
o1 = PDF.PDFOUTLINES_Add(0, "Outline1", lAction, 0)
o2 = PDF.PDFOUTLINES_AddChild(o1, "Outline2", lAction, 0)
o3 = PDF.PDFOUTLINES_Add(0, "Outline3", lAction, 0)
o4 = PDF.PDFOUTLINES_AddChild(o3, "Outline4", lAction, 0)
o5 = PDF.PDFOUTLINES_AddChild(o3, "Outline5", lAction, 0)
cnt = PDF.PDFOUTLINES_Count ' cnt = 5
PDF.EndDoc

See Also

Reference
Outlines