Collapse All Syntax| LONG Resolution { get; set; } |
Resolution of the page (in DPI)
RemarksThe resolution property is used for setting resolution (DPI) for new pages. This property does not apply to existing pages.
The default value is 72.
Equivalent in new interface: IPDFDocument4::PageResolution.
Example{ PDF object is supposed to be created }
PDF.Resolution := 600 { set any DPI here }
PDF.BeginDoc;
i := PDF.AddImageFromFile('picture.gif');
w := PDF.GetImageWidth(ind);
h := PDF.GetImageHeight(ind);
r := PDF.GetImageResolution(ind);
coeff := PDF.Resolution / r;
{ Show image in 100% sizes but in PDF page's resolution }
PDF.PDFPAGE_ShowImage(i, 10, 10, w*coeff, h*coeff, 0.0);
PDF.EndDoc;
// PDF object is supposed to be created
PDF->Resolution = 600; // set any DPI here
PDF->BeginDoc();
LONG i = PDF->AddImageFromFile("picture.gif");
LONG w = PDF->GetImageWidth(ind);
LONG h = PDF->GetImageHeight(ind);
LONG r = PDF->GetImageResolution(ind);
DOUBLE coeff = (DOUBLE)PDF.Resolution / r;
// Show image in 100% sizes but in PDF page's resolution
PDF.PDFPAGE_ShowImage(i, 10, 10, w*coeff, h*coeff, 0.0);
PDF.EndDoc();
// PDF object is supposed to be created
PDF.Resolution = 600; // set any DPI here
PDF.BeginDoc();
long i = PDF.AddImageFromFile("picture.gif");
long w = PDF.GetImageWidth(ind);
long h = PDF.GetImageHeight(ind);
long r = PDF.GetImageResolution(ind);
double coeff = (double)PDF.Resolution / r;
// Show image in 100% sizes but in PDF page's resolution
PDF.PDFPAGE_ShowImage(i, 10, 10, w*coeff, h*coeff, 0.0);
PDF.EndDoc();
' PDF object is supposed to be created
PDF.Resolution = 600 ' set any DPI here
PDF.BeginDoc
ind = PDF.AddImageFromFile("picture.gif")
w = PDF.GetImageWidth(ind)
h = PDF.GetImageHeight(ind)
r = PDF.GetImageResolution(ind)
coeff = PDF.Resolution / r
' Show image in 100% sizes but in PDF page's resolution
PDF.PDFPAGE_ShowImage i, 10, 10, w*coeff, h*coeff, 0.0
PDF.EndDoc
See Also